David,

I am enjoying the Articulate 29×29 series.

Is there a way to make the hyperlinks accessible via the keyboard? I didn’t see any indication that I could tab to the hyperlinks.

However, I did find that I was able to navigate the course using the arrow keys and get to the pages without following your hyperlinks. This let me get to pages that would have otherwise required me to click a hyperlink. Is there a way to prevent navigating with the arrow keys?

Hi Mike.

Glad to hear you are enjoying the series!

Unfortunately, there isn’t a way to make hyperlinks accessible via the keyboard.

However you did spot what I had already suspected I had forgotten to remove before publishing and that was the ability to use keyboard shortcuts to change slides! Should have mentioned that in the article! You can take away the facility to navigate with the keyboard by going to the Articulate menu and selecting Player Template Builder -> Navigation and unchecking “Enable keyboard shortcuts” in the “Miscellaneous” section, something which I have just done with the demo, so it shouldn’t be possible to move around with the keys anymore. Thanks for pointing this out!

Thanks for the great demo,

Thinking about user interface as I went through your demo: I found myself searching for a back button, to review material that I missed when I got distracted.

Same desire for a back button when I decided I didn’t like my choice of keeping the music on and wanted to make a different choice. It makes more sense for my own learning objectives to always provide the ability to go back.

Otherwise, I really liked this as a simulation of a software simulation exercise developed directly in PowerPoint rather than a third party.

Thanks!

Annette, thanks for your comments and glad you liked the demo.

Of course, a back button would be welcome and perhaps I’ll put one in when I have a minute although that won’t necessarily be possible with all the slides given the branching.

It was actually created as a quick demo of hyperlinking rather than as a formal presentation and it kind of took off by itself, so to speak, so I didn’t get round to setting up proper internal navigation like back buttons or even buttons to menus.

But you are right. It would be better! And they would show further how to use hyperlinking in presentations without using the Articulate player template.

Annette makes a good point and something to consider when you disable the navigation and that is to provide a means of at least starting over and or perhaps going to the beginning of sections if you use branching.

I’m working on a demo for a future blog post that uses hyperlinking to move forward, but I added some smaller translucent buttons so the user can move around…a little.

OK I have made a couple of changes. I have (quickly) added a menu bar at the bottom of the presentation to allow users to go back a page and also go back to the start, and to the previous menu. I have also made the presentation show in ‘Slide Only’ view only to allow a secret menu to be functional. I have inserted an SDK Flash file somewhere on the presentation to allow a trainer to navigate easily. One drawback, though, is that notes are no longer visible.

We’ve noticed some issues when linking to .doc files that are stored on our Sharepoint site. If you click the link in your .ppt’s slide show, you get a few warning windows, and after clicking OK, you can see the document. However, once you publish to Articulate, the link gives a “Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.” message. But if you refresh that blank window, it will pop the warnings, but allow you to open the .doc. We run Articulate 5 on XP SP2. Anyone else have this problem?

When I publish a quiz and insert it into the power point presentation,earlier, it used to create a place holder slide with blue back ground with words indicating that it is a place hloder for the quiz. Now, when I do the same, it is creating only a blank slide in the presentation as a place holder no words or color.
Recently, i had to reinstall the articulate on my laptop.

Can some one has the answer?

Hello Tom,

Just wanted to say thank you for all the great help.I was great to see you at ASTD this week.

I have been trying to construct simple branching by inserting hyperlinks to other slides within the same presentation. When published, none of these hyperlinks function. What am I doing wrong? Is there a tutorial on branching I can use?

Thanks,

Gloria

I understand the hyperlink mehcanics, but how did you make the ladybirds fly on the path?

It’s also worth noting that hyperlinks will not work if the destination slide is hidden(In Powerpoint).

Kat,

I’m experiencing the same issue when linking to an external Word file. I create a hyperlink to a Word doc in my PowerPoint file. The Word doc resides on my local PC. I publish the PowerPoint file in Articulate and upload to my web server. When I click on the link, I get an error message in IE stating that there is no page to display, and that the action was canceled. However, If I refresh the page, I get prompted to Open or Save the file. I think this might be an Internet Explorer issue. Anyone have any ideas?

Quick question – if i leave the navigation as default, and link to an external hyperlink in a separate browser window, can I pause the playback of the presentation?

Thanks!

Learning how to use hyperlinks in presenter will take my presentations to an entire new level.

Thanks.

I watched the presentation to learn how to link a pdf file to an object. When I clicked on the line of text that was supposed to bring me to the linked info, a got a message that a pop up was blocked, When I clicked to temporarily allow, it said the web page was attempting to close. Then poof, the web page was gone. Any advice on how to avoid this for my users because this is exactly what I want to do…

Hi Alanna. Which browser are you using? I could not reproduce this on either Firefox or Internet Explorer 7, even with the Pop Up Blocker being on.

IE 7 – leave it me to come up with the wierd computer glitch!

Hi everyone,

I’m trying to put in a link to a pdf file in Powerpoint which worked when viewed as a ppt presentation but didn’t when I published it as an Articulate presentation. Any ideas there?

I have a similar question to Alanna’s. I am currently creating a course in Articulate. I created an action button in PowerPoint that links to a Word document, which is on a website. While in PowerPoint, it directs me to the document, but once I publish the course, the link no longer works. My pop-up blocker appears, but after I temporarily allow pop-ups, a new internet page appears for a second then disappears and it resets my presentation. Any suggestions?

Hi, I’m wondering if it’s possible to use a hyperlink to open a tab? I’ve been searching for a while without any luck. Cheers

I may have missed the response that answers this question; but my issue is similar to the initial query for this thread: I have a presentation that has some materials for all, then 2 branches for 2 separate groups. Everyone needs the first section; specific personnel need either branch 1 or branch 2 in addition to the general. I need the presentation to register the module “complete” after the slides for everyone complete–as it stands, unless someone goes through the entire presentation, the status remains “In Progress.”

Is there a fix for this issue?

Kind regards,

Jess G.

Hi Jess, one workaround would be to have a quiz, survey or choices Learning Game right at the end of your presentation and to track according to completion of that activity. However way the users go to that quiz (via branch 1 or 2) would be unimportant. If you have Quizmaker ‘09, you could easily mask a question page as just a simple concluding slide. You can even hide the incorrect answer to make sure that your students got full marks and thus moved the presentation to complete.

Hi Mr. Anderson (or, Mr. Moxon):

Great–now, is there a help file to explain how to do this? A tutorial?

I am new to Articulate (trial version in December 2008–bought the full version in January this year).

In other words: I am a neophyte, and I need some cool tips about using tools quickly. Experimenting is great; but when the pressure is on, I need to know how to make it happen ASAP. Any help that either of you can provide will be very appreciated.

Kind regards,

Jess Galloway

Can you explain how following scenario should be handled? After completion of my presentation, I want end user to confirm completion. Behind the scene I want to call hyperlink with event ID (http://www.mytrackingsystem.com?u=userid) and also close the browser.
Currently I have hyperlink but there is no way to let user know that their completion is recorded and they should move on.
Any thoughts?

[...] you continue through the course, you’ll arrive at a branching slide, where e-Mersion used the hyperlinking feature of PowerPoint to allow you to pick the content you’d like to review: a CPR Demonstration built in [...]

I’ve read several questions about linking to external docs or pdfs from within Articulate but haven’t seen a response. The Articulate presentation is published to the same server as the pdf documents. As noted by others, the links work when within PowerPoint but fail to find the ‘page’ from within the Articulate presentation. What piece(s) am I missing in this process?
Thanx

David,

The presentation was very helpful.
I am trying to connect to a pdf file from a text link in my PowerPoint presentation. I now realize how to do that via the attachments tab. But I need to make sure the user can not get to this link by just going to the attachments tab, which I am also using for other items. The pdf file is a completion certificate and I am looking to link to it at the end of the course.

I’m having the same hyperlinking files trouble as several other users in the current thread. I’ve tried moving the document to different locations, all to no avail. I’ve browsed to select the address of the document, as well as typed in the address, as advised by other online threads. Everything works in Powerpoint until the presentation is published. I tried to link the documents as attachments and am having the same issue. The attached document is in the generated data file within the downloads file, but the published presentation doesn’t find it. I have quite a bit of time into this at this point but this is an important feature and so am ardently seeking a solution.

I am experience the same hyperlinking problem described by several of the posters above. I am trying to link to a Word document that is stored in the same directory as the player.html file on the web server. I’m linking to the file from the PowerPoint using a relative link using just the file name and extension. This works in Firefox but doesn’t in IE. In IE the page just seems to flicker and does nothing.

Do you need to only use absolute links to the exact location of the file using a http://... link? Relative links would be much easier if IE would behave as it should.

I’ve also been experiencing problems with attachments – links that open .pdf, .xls and .doc to be specific – and getting different results with different combinations of IE (6 or 7)and Office apps (2003 and 2007). Has anyone else experienced this? I don’t know whether this is an Articulate or Microsoft ‘feature’ or to do with settings or security or pop-up blockers…

If you’re experiencing any difficulty with attachments, I’d recommend submitting a support case so that we can assist you more closely with the issue.

links that open .xls and .doc won’t work after you publish because when you publish it become web those files need to be in html format if you want your link to work or put your files in a web server and link to them with the absolu link like http://….

Dave, your ladybird demo was great. Both you and Tom have helped me understand more of the advanced branching techniques in Articulate. (Both Tom’s “Dump the Drone Demo” and your “LadyBirds on Branches” demo really showed what Articulate branching and hyperlinking can do!) I do have one question that either or you could answer. Dave, I noticed in your demo that when you branched users back to the menu, the menu showed that one section had been completed and then again when the second section was completed. How did you accomplish that?

I would like to use the Notes to provide a collection of relevant links. Is there a way to enable and activate hyberlinks in Notes?

I don’t understand why it is so difficult to provide an answer to a simple question that many have posed in this blog more than once. I still am without an answer after reaading the entire posting list. What does one do to ensure that an external link to a file is facilitated in an Articulate lesson?

Hi Barbara (& anyone else experiencing issues with attachments)- please take a look at this Knowledge Base entry to learn more about adding attachments in PowerPoint and Articulate Presenter:

Add a link in PowerPoint to a File type Attachment

I hope this helps. If you continue to have difficulty, please submit a case to us with details of the issue you’re experiencing.

Hi Kimberley, those menus are in fact different. The viewer is branched to those menus according to what they have already seen. If you click on the top right of the page, in the black patch of the trees, you will find a “secret” button that brings up the navigation menu. That way you’ll get a better idea of the different menus. Hope that helps and sorry about the delayed reply.

Gabe, to add to the problem of Barbara/Katherine/Janis and others, my issue is not that I can’t open the external attachments that I have linked by hyperlinks from my powerpoint, but that the file ( a pdf) opens in IE. Why doesn’t it use its associated app to open, namely Adobe in my case.

Hi David- it sounds like your issue is just a preference related to your Acrobat settings, not Articulate. You might want to check out this Adobe article.

Hello,

I would like to know how can I apply back/pause/forward controller to one slide only and not all the other remaining slides in one powerpoint presentation,

For better clarification, I want to apply a player template including back/forward/pause controller in one slide only. While other slides will not have these controllers. I want to know how could these be done in one powerpoint presentation.

Kindly advise.

Thanks
M

Hi Moham14,

I think that I have found a solution for you. Please try this:

1. Open PowerPoint and click on the Articulate menu
2. Choose Slide Properties
3. In the Lock column, click the slides in which you want to disable the back/pause/forward controller
4. Click OK and publish your presentation

By “locking” a slide, you completely disable the ability for your end-user to use that controller.

Please let me know if this works for you.

Hi Moham14,

I just received the email that you sent to Gabe. Essentially, you can’t apply a different player template to a different slide. So, to enable the play controls for only the Engage interaction, you would have to “lock” all of the other slides and then keep that slide that contains the Engage interaction unlocked.

I hope that helps!

Hello,

Thanks for your support. I have tried this one and it worked, just have to lock the other windows. Also, you know, I have changed the view in slide properties to slide view only for certain slides and then the one that needs to have back and next controller is under standard view. And its working. Thanking you very much for your assistance.

Regards
M